Multi-Zone; Quick Setup Menu - Onkyo TX-SR444 Basic Manual

select a preset radio station, press
main unit or CH +/− on the remote controller.
● To delete a preset station, after selecting the preset
station you want to delete, press MEMORY on the
remote controller, and with the preset number flashing
on the display, press CLR on the remote controller.
AM/FM frequency step setting
It may be necessary for you to change the
frequency step to tune the radio in your area.
Change the step with the following procedure. Note
that when this setting is changed, all radio presets
are deleted.
1 After pressing RECEIVER on the remote
controller, press SETUP.
2. Select "5. Hardware" with the cursor and press
ENTER.
3. Select "Tuner" with the cursor and press ENTER.
4. Select "AM / FM Frequency Step" (North
American and Taiwanese models) or "AM
Frequency Step" (European, Australian and
Asian models) with the cursor and select the
frequency step for your area.
(For Taiwanese models only)
The setting is "10 kHz / 0.2 MHz" at the time
of purchase. Please change it to "9 kHz /
0.05 MHz".
En-14
PRESET on the
4
t u

Multi-zone

You can listen to audio in a room (called ZONE B) other
than ZONE A (the room where this unit is located).
You can play in both ZONE A and ZONE B or just in ZONE
B.
Press ZONE A/B on the remote controller several times
to select the zone�
Either "A" or "B" lights on the display of the main unit to
indicate which zone is currently selected.
● Alternatively you can press ZONE A or ZONE B on the
main unit.
● The volume of ZONE B is the same as the volume set
for ZONE A.
● It is not possible to listen to different sources in ZONE A
and ZONE B.
● The listening mode is fixed to All Ch Stereo when
playing in ZONE B. Furthermore, no sound will be
output from the back speakers and height speakers in
ZONE A.
Step 3: Playing Back
5

Quick Setup Menu

You can perform common settings on the TV screen while
playing.
1� Press Q on the remote controller�
The Quick Setup menu is displayed on the connected
TV's screen.
Quick Setup
Listening Mode MOVIE/TV
Audio MUSIC
Information GAME
2� Select the item with the cursors on the remote
controller and then press ENTER�
● To return to the previous screen, press RETURN.
3� Select the setting with the cursors of the remote
controller�
 Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC" and "GAME".
After selecting the Listening Mode, press ENTER button to
confirm.
● It cannot be set when audio is played from the TV's
speakers.
 Audio: You can perform various audio settings including
audio quality and speaker level adjustment.
● You cannot select this item when audio is output from
the TV's speakers.
Bass, Treble: Adjust volume of the front speaker.
● It cannot be set if the listening mode is Direct.
Phase Matching Bass: Suppress phase shift in the
midrange to enhance bass sound. Thus smooth and
powerful bass sound can be obtained.
● It cannot be set if the listening mode is Direct.
Center Level, Subwoofer Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
● Changes may not be possible depending on the
speaker settings.
BD/DVD