Install Cradle; Starting Up - Magellan Roadmate Commercial RC9496T-LMB User Manual

Map Screen Footer Bar
Go To/My Route
SmartFind
OneTouch
™
Address Book
Dial Pad
Settings

Install Cradle

Choose a location
Follow the Safety guidelines, and find a location in your car
with a clear view of the sky.
Clean the surface
Clean the area on the windshield where the device will be
mounted. Allow the surface to dry.
Install the car cradle
Hold the cradle firmly against the window surface and push
lever towards the base. Snap the device on to the cradle.

Starting Up

Connect power
The device has an internal, rechargeable battery that
charges whenever it is connected to vehicle power or a
compatible wall charger. Your device may not be fully charged when you purchase it.
Power On, Suspend, Power Off
Turning the Magellan RoadMate Receiver On
1. Press and hold the Power button for 2-3 seconds. The Magellan logo may not appear until a
few seconds after you release the button.
Turning the Magellan RoadMate Receiver Off (Suspend Mode)
If you suspend operation, the route and all information is held so you can quickly resume use.
1. Remove power or press and release the Power button.
A confirmation with countdown timer will appear.
RC9496T-LMB User Manual
Go To: Tap to use the keyboard and search a POI or address. Searched
items can be used as a destination or saved to the address book.
My Route: Displayed while routing. Tap to view information about the
route and for tools to delete, pause, or revise the route.
Access the OneTouch menu providing easy access to saved
destinations.
Tap to access your address book. It contains saved addresses,
contacts, trips, and recent destinations.
You can use any or those as a destination.
Tap to bring up phone functions and access to Bluetooth settings.
Tap to access setting options for the Magellan RoadMate receiver.
5 www.magellangps.com