Installation Instructions; Selecting The Location; Attaching The Magellan Roadmate Receiver To The Car Cradle; Attaching The Car Cradle To The Car Mount - Magellan RoadMate N399M User Manual

Table of Contents

Advertisement

Installation of the Magellan RoadMate receiver is simple and easy. The
hardest part will be picking the best location.

Selecting the Location

A few tips on selecting the proper location.
Mount the Magellan RoadMate receiver in a place where it can be easily
seen and will not interfere with your view of the road.
The Magellan RoadMate receiver should be mounted in such a way that
the antenna, (located in the top of the receiver), has an unobstructed view
of the sky through the windshield.
Make sure that the Magellan RoadMate receiver or any cabling will not be
disturbed if the airbags are activated.
Be sure to check your local and regional laws before mounting to the
windshield. Some states have laws restricting the mounting of any device
on the windshield.

Attaching the Magellan RoadMate receiver to the Car Cradle

Slide the Magellan RoadMate receiver on the car cradle so that the slot on the
Magellan RoadMate receiver aligns with the tab on the car cradle. Slide the
Magellan RoadMate receiver all the way down until it rests on the 'feet'. You
should notice a click when the receiver is fully mounted in the cradle.

Attaching the Car Cradle to the Car Mount

Attach the car cradle to the car mount.
12

Installation Instructions

Advertisement

Table of Contents
loading

Table of Contents