Effects; Rear Panel - Pioneer DJM-850 Operation Manual

H. Effects
The Beat Effects section of the Pioneer DJM-850 is offering a variety of
high-quality hardware beat-based effects that can be applied to any of
the 4 available decks, Master, Crossfader assigned sides and both
Microphone Inputs.
The Effects that come with VirtualDJ can be applied to any of the 4
decks as well, using the corresponding Effect buttons from the GUI or an
additional MIDI device and will be applied before the hardware effects.
The functionality of this section is briefly described below. Please
refer to the Manual of the unit for a detailed description.
30. BEAT MULTIPLIER. Set the Beat fraction for synchronizing the Effect
sound.
31. BEAT TAP. When the BPM measurement is set to TAP, the BPM is
manually input by tapping the button.
32. BEAT AUTO. Switches the BPM measurement mode (auto or
manual)
33. EFFECT CUE. Use this button to send the applied Beat Effect output
to the Headphones channel (for monitoring prior applying)
34. EFFECT SELECT. Select one of the available Beat Effects.
35. EFFECT CHANNEL. Select the Channel on which the Beat Effect will
be applied to.
36. TIME. Adjust the Time parameter of the selected Beat Effect
37. EFFECT LEVEL. Adjust the quantitative parameter of the selected
Beat Effect.
38. EFFECT ON/OFF. Turn the selected Beat Effect on/off.
I. Rear Panel
VirtualDJ 8 – Pioneer DJM-850
11