Pioneer DJM-850-K Operating Instructions Manual
Hide thumbs
Also See for DJM-850-K:
- Service manual (203 pages) ,
- Operating instructions manual (84 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pioneer DJM-850-K
Summary of Contents for Pioneer DJM-850-K
-
Page 1: Operating Instructions
DJ MIXER DJM-850-K DJM-850-S DJM-850-W http://pioneerdj.com/support/ The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. Operating Instructions... - Page 2 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
- Page 3 (2) this device must accept any interference received, including interference that may cause undesired operation. Product Name: DJ MIXER Model Number: DJM-850-K, DJM-850-S, DJM-850-W Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A. Phone: 1-800-421-1404 URL: http://www.pioneerelectronics.com...
- Page 4 A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002*_A1_En...
-
Page 5: Table Of Contents
Contents How to read this manual The names of displays, menus, and buttons in this manual are enclosed in brackets. (e.g. [MASTER] channel, [ON/OFF], [File] menu) Before start Features ....................... 6 What’s in the box ..................6 Connections Rear panel ....................7 Connecting input terminals ............... -
Page 6: Before Start
This unit is a 4-channel DJ mixer carrying over the technology of the Pioneer DJM series, the world standard for club sound. It is not only equipped with a variety of functions for DJ performances, including What’s in the box... -
Page 7: Connections
CONTROL terminal (page 8) This is a Ø 3.5 mm mini phone jack type DJ player control terminal. If you connect a Pioneer DJ player using a control cable (supplied with a DJ player), you can start playback of control other operations... -
Page 8: Connecting Input Terminals
MASTER OUT AC IN 1 GND 2 HOT 3 COLD To power outlet Pioneer DJ players Pioneer DJ players ! To use the fader start function, connect a control cable (page 15). Connecting output terminals CH 4 CH 3 CH 2... -
Page 9: Connecting To The Control Panel
This Software End User License Agreement (“Agreement”) is between you (both the individual installing the Program and any single legal entity for which the individual is acting) (“You” or “Your”) and PIONEER CORPORATION (“Pioneer”). TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS Microphones THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT. -
Page 10: Installing The Driver Software
Agreement. Mac OS X 10.5 / 10.6 / 10.7 32-bit 5 Termination version Pioneer may terminate this Agreement at any time upon Your breach of ® Windows 7 Home Premium/Professional/Ultimate 64-bit any provision. If this Agreement is terminated, You will stop using the... -
Page 11: About The Setting Utility Software
5 Check the details on the screen and click [Continue For Windows Anyway]. Click [Start] menu > [All Programs] > [Pioneer] > [DJM-850] > [DJM- 850 Settings Utility]. 6 When the Software Use Agreement screen appears, select [English], carefully read the Software end user For Mac OS X license agreement and click [Continue Anyway]. - Page 12 Setting the audio data output from this unit to Click the [ASIO] tab. the computer Display the setting utility before starting. 1 Click the [MIXER OUTPUT] tab. ! If the buffer size is made large, drops in audio data (breaks in the sound) occur less easily, but the time lag due to the delay in the transfer of the audio data (latency) increases.
-
Page 13: Operation
Operation POWER MASTER MIDI LEVEL START MIC1 ON/ OFF SETUP CD/LINE PHONO CD/LINE LINE CD/LINE LINE CD/LINE PHONO / STOP WAKE UP BEAT EFFECTS TRIM TRIM TRIM TRIM OVER OVER OVER OVER OVER MIC 1 CH SELECT LEVEL PARAMETER MIC 2 AUTO BEAT - 10... - Page 14 1 MIC1 LEVEL control (page 16) n MONO, STEREO selector switch (page 16) Adjusts the sound level output from the [MIC1] channel. Switches the sound output from the [MASTER1] terminals, etc., between monaural and stereo. 2 MIC2 LEVEL control (page 16) o BOOTH MONITOR control (page 16) Adjusts the sound level output from the [MIC2] channel.
-
Page 15: Basic Operation
The master level indicator lights. If you connect a Pioneer DJ player using a control cable (supplied with a DJ player), you can start playback of control other operations of the DJ player with the fader of this unit. -
Page 16: Using A Microphone
Start playback using the crossfader ! To adjust the sound output from the [USB] terminals, select [REC OUT] at [Mixer Audio Output] in the setting utility. 1 Set the [CROSS FADER ASSIGN (A, THRU, B)] selector 1 Set the [MONO, STEREO] selector switch to [STEREO]. switch to [A] or [B]. -
Page 17: Advanced Operations
This displays the parameters specified for the indi- Advanced Operations vidual effects. When the [BEAT c, d] button is pressed, the corre- Parameter display sponding beat fraction is displayed for 1 second. section When a value outside the parameter range is speci- fied with the [BEAT c, d] button, the value does not SOUND COLOR FX change and the display flashes. - Page 18 Using the external effector Operating an external MIDI sequencer 1 Connect this unit and external effector. This unit is equipped with a “Full Assignable MIDI” function allowing For instructions on connections, see Connecting output terminals on the operation information of virtually all of the unit’s controls and but- page 8.
-
Page 19: Types Of Effects
Types of effects BEAT COLOR FX/SOUND COLOR FX effect types Effect Name [BEAT] button status Descriptions [COLOR] control White noise generated inside this unit is mixed in to the Turn counterclockwise: The cut-off frequency of the filter sound of the channel via the filter and output. through which the white noise passes gradually decreases. - Page 20 Use this to set the cycle at which the cut-off fre- SPIRAL TIME control (parameter 2) quency is moved. 10 to 32000 (ms) This function adds a reverberation effect to the input sound. LEVEL/DEPTH control The further the control is turned clockwise, the more When the delay time is changed, the pitch changes simultaneously.
- Page 21 SLIP ROLL SND/RTN The sound being input at the point when the [ON/OFF] is pressed is Connect an external effector, etc., here. recorded, and the recorded sound is output repeatedly according to the SEND beat fraction set with the [BEAT c, d] buttons. When the effect time changes, the input sound is recorded again.
-
Page 22: List Of Midi Messages
List of MIDI Messages ! “CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as timbre, volume, etc. On this unit, values from 0 to 127 are output as CC mainly when controls and faders are operated. CC are also output when certain buttons are operated. - Page 23 Category SW Name SW Type MIDI assignment Trigger/Toggle Transmitted data Switch CC 042 OFF=0, ON=127 DELAY ECHO Switch CC 055 OFF=0, ON=127 Switch CC 061 OFF=0, ON=127 UP ECHO SPIRAL Switch CC 043 OFF=0, ON=127 REVERB Switch CC 054 OFF=0, ON=127 TRANS Switch CC 053...
-
Page 24: Changing The Settings
Changing the settings 1 Press the [MIDI] [SETUP (WAKE UP)] button for at About the auto standby function least 1 second. When [Auto Standby] is set to [ON], the standby mode is set automati- The [USER SETUP] screen is displayed. cally if 4 hours pass with all of the conditions shown below met. -
Page 25: Additional Information
Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. - Page 26 Problem Check Remedy Effect sound cannot be monitored — The circuit generating the [ECHO], [UP ECHO], [SPIRAL], [REVERB], [ROLL], even when the [CUE] button for [BEAT [SLIP ROLL] and [REV ROLL] echo sounds is positioned after the effect circuit, EFFECTS] is pressed. so the effect sound cannot be monitored.
-
Page 27: Block Diagram
Block Diagram MIC1 MIC1 LEVEL MIC2 LEVEL MIC2 DIGITAL MASTER CD/LINE FPGA PHONO MUTE PHONES Digital MASTER CH1_ASEL_OUT MASTER 1 MUTE CD/LINE CH1_Analog PHONES MUTE LINE CH2_Analog MASTER MASTER 2 MUTE CH2_ASEL_OUT MUTE CD/LINE BOOTH CH3_Analog BOOTH LINE D S P CH4_Analog MUTE CH3_ASEL_OUT... -
Page 28: About Trademarks And Registered Trademarks
Phone jack (Ø 6.3 mm) ..............1 set RETURN Input terminals trademarks Phone jack (Ø 6.3 mm) ..............1 set MASTER output terminal ! Pioneer and rekordbox are trademarks or registered trademarks of XLR connector................... 1 set the PIONEER CORPORATION. RCA pin jacks ..................1 set ®... - Page 31 Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either: (1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing informing you why it will not take any action.
- Page 32 URL suivantes : In the USA & Canada/Aux Etats-Unis & Canada http://www.pioneerelectronics.com S018_B1_EnFr_PSV © 2012 PIONEER CORPORATION. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC.