Headphones; Microphone; Input Selects - Pioneer DJM-850 Operation Manual

D. Headphones
13. SPLIT. When set to STEREO, both sides of Headphones will output
the same CUE or MASTER Outputs (depending on the MIXING
knob. When set to MONO SPLIT, one side of Headphones will
output the Master and the other the CUE decks.
14. PHONES MIXING Use this knob to mix between CUE and Master
MIX in the Headphone channel. When all the way to the left, only
channels routed to Headphones (via the CUE buttons) will be heard.
When all the way to the right, only the Program mix will be heard.
15. PHONES LEVEL. Use this knob to set the volume to the
Headphones Channel
16. PHONES INPUT Connect a pair of ¼" Headphones t this socket for
monitoring
E. Microphone
17. MIC1 INPUT Connect a microphone using a XLR 3-pin plug, a
balanced ¼" TRS plug or unbalanced TS plug. An additional
Microphone Input is available at the rear panel as well.
18. MIC LEVEL. Use these 2 knobs to adjust the Input level of
Microphone Inputs 1 and 2.
19. MIC EQ. Use these knobs to adjust the high/mid and low
frequencies of both the Microphone Inputs.
20. MIC ON/OFF/TALKOVER/ Use this switcher to run on/off the
Microphone Inputs. When set to TALK OVER sound will be
automatically dropping when Microphone is used.
F. Input Selects
21. INPUT SELECT. Set this selector to the
appropriate position
Channel Input will be routed to the 4 Mixer
Channel Outputs
Set to USB position to route a VirtualDJ deck output to a mixer channel.
On PHONO/CD/LINE position the audio signal from the Inputs (1, 2, 3 and 4 at the rear
panel) will be routed directly to the Output of this Mixer Channel. In this case the sound
to define which
VirtualDJ 8 – Pioneer DJM-850
9