Advertisement
Aluminium Ansaugstutzen =aluminium aspiration port
Flexibler Metallschlauch = flexible metal hose
Anschluß für Metallschlauch = connection for metal hose
Auffangbehälter = collection container
Ein/aus Schalter = On/off switch
Tragegriff = carrying handle
Motorschutzkappe =engine protection cap
Deckel = cover
Frequent questions:
•
Why can't I remove big pieces with the vacuum cleaner?
The vacuum cleaner is designed for sucking only ashes. Big pieces should remain in the
fireplace to be burned later on.
•
Why is the hose so rigid?
The hose is a bit unhandy because it can aspirate warm coals and it is flame-retardant. The
hose has to be placed in such a way, that it forms a natural curve between the vacuum
cleaner and the held nozzle in the fireplace. If you place the vacuum cleaner so that a hose
kink is formed, there is no suction power anymore. The engine is cooled by the outside air
which means, that in case of nozzle clogging the engine will not be damaged.
•
I have no suction power.
Usually bad power suction is attributed to the fact that, while vacuum cleaning, outside at the
primary filter a layer of ash crust has been formed and the device is not properly ventilated.
Clean the filter.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Seite 4
Advertisement
