Manual Hardware Installation - D-Link DCS-5020L User Manual

Section 2 - Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero
Configuration Setup.
Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available LAN port on your router. Plug the supplied power
adapter into the back of the camera
Plug in the External Power Adapter
Plug the power adapter into a wall outlet.
Configure Your Camera
Refer to "Configuration" on page 21 for information on how to configure your
camera.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For
more information, refer to "WPS - Push Button Setup" on page 17. If your router
does not support WPS, you will still be able to set up your camera's wireless
settings in the camera's web interface.
D-Link DCS-5020L User Manual

Manual Hardware Installation

15