Table of Contents
Advertisement
IP auto configuration
With this option you can control whether the DKVM-IP1 should fetch its network settings
from a DHCP or BOOTP server. For DHCP, select "dhcp" , and for BOOTP select "bootp". If
you choose "none" then IP auto configuration is disabled, and you will need to set a static
IP.
Preferred host name
This sets the preferred host name to request from DHCP server. Whether the DHCP
server takes the DKVM-IP1 suggestion into account or not depends on the DHCP server's
configuration.
IP address
Here you can set the DKVM-IP1's IP address.
Subnet Mask
Here you can set the subnet mask for the DKVM-IP1.
Gateway IP address
Here you can set the gateway for the DKVM-IP1. In case the DKVM-IP1 needs to be
accessible from networks other than the local one, this IP address must be set to the local
network router's IP address.
Primary DNS Server IP Address
Here you can set the primary DNS server for the DKVM-IP1. This option may be left blank,
but the DKVM-IP1 will then be unable to perform name resolution.
Secondary DNS Server IP Address
Here you can set the primary DNS server for the DKVM-IP1. It will be used in case the
Primary DNS Server cannot be contacted.
Host Console And HTTPS port
Here you can set the port the DKVM-IP1 will use for the Host Console server and
HTTPS server. If this is blank, the default port of 443 will be used.
88
Advertisement
Table of Contents
Troubleshooting
