Dkvm-Ip1 Keyboard Settings; Mouse Settings For The Host And Remote Systems - D-Link DKVM-IP1 User Manual

The following settings must be configured to ensure that the Remote keyboard, video,
and mouse inputs are transmitted correctly:
2.3.1

DKVM-IP1 keyboard settings

The keyboard model emulated by the DKVM-IP1 must be set properly in order for
keystrokes received by the Host computer to match the ones sent by a Remote computer.
View these settings in the DKVM-IP1's Web Management GUI by clicking KVM Settings
> Keyboard/Mouse Settings (s ee the screenshot below).
Above: Click on KVM Settings > Keyboard/Mouse in the left-hand panel of the Web
Management GUI to configure the correct settings for the keyboard model to emulate for
the Host computer. The correct settings are required for the Remote keyboard's input to be
transmitted to the Host computer properly.
2.3.2

Mouse settings for the Host and Remote systems

A common problem with KVM devices is the synchronization between the Host-side and
Remote-side mouse cursors. The DKVM-IP1 addresses this problem with an intelligent
synchronization algorithm.
22