Table of Contents
Advertisement
Operating Procedures:
1. Before starting, create a floppy disk image file. This process is explained in section 4.2.5.
For this user manual, we used the RawWrite program to create the floppy disk image, but
you can use any other software that is designed to create disk images.
2. Use the disk-image software to create the file and save it in a suitable folder on your
computer.
3. Open your browser and log into the DKVM-IP1 web GUI. Click Virtual Media > Floppy
Image, then click the Browse button to choose the image file.
4. Click the Upload button to upload the selected image file to the DKVM-IP1's onboard
memory.
5. After you have uploaded the image file, you will see the information screen below.
6. Open the Host system's "My Computer" folder. The folder will show that a virtual floppy
drive has been created on the Host system. The drive will be classified as a 3,5-inch
Floppy Disk.
70
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DKVM-IP1 and is the answer not in the manual?
Questions and answers