Video - D-Link DKVM-IP1 User Manual

when the mouse settings on the host are linear. This means that any mouse
acceleration settings of the OS should be disabled. Also, the Host Console's Intelligent
Sync function will not be available when fixed scaling is selected.
• Absolute mouse scaling for MAC server
Enable this option if the Host computer uses Mac OS.
After making any changes, click the Apply button to save your settings.
4.4.3

Video

Miscellaneous Video Settings
• Noise filter
This option defines how the DKVM-IP1 reacts to small changes in the video input signal.
Turning on the noise filter can help reduce video flickering that is often caused by
interference, and can help lower unnecessary bandwidth consumption. A large filter
setting needs less network data traffic and enables a faster video display, but some
small changes in the display may not be recognized immediately. A small filter setting
displays all changes instantly, but may lead to a constant stream of network traffic, even
if the display content is not actually changing (depending on the quality of the video
input signal). In general, the default setting should be suitable for most situations.
• Force Composite Sync (Required for Sun Computers)
When connecting the device directly to a legacy Sun computer that uses composite
sync as the video output, the DKVM-IP1 may not recognize the composite sync video
output automatically. To support signal transmission from a Sun machine, enable this
option. If this is not enabled, the video feed of the Host Console may not be visible.
After making any changes, click the Apply button to save your settings
86
.