lighting. To reduce flicker, you can change the flicker adjustment
setting to Auto or to the proper frequency (50Hz or 60Hz) of the
country where your device is being used.
•
Record with Audio. Select On to record audio with the captured
video clips. This is selected by default. If you select Off and then
capture a video clip, it will have no audio.
•
Prefix. Specify how to name captured images and video clips. When
Default is selected, the file name of each new captured file is set to
"IMAGE" or "VIDEO" followed by a sequential number, for example:
IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
•
Counter. By default, captured image or video files are named with a
prefix and some sequential numbers, such as 001, 002, and so on. To
reset the numbering to "001" for your captured files, tap Reset.
•
Recording Limit. Specify the maximum time or file size for recording.
•
Template Folder (in Picture Theme mode only). By default, templates
are stored in the \My Documents\Templates folder on the device's
Main Memory. If you transferred some templates to a storage card
(via File Explorer), set this option to Main + Card to specify that
templates are located in both the main memory and the storage card.
•
Adjust. This option allows you to adjust the camera display
properties, such as Contrast, Saturation, Hue, and Sharpness.
1
3
4
5
2
Experiencing Multimedia 211
1
Tap a property to adjust.
2
Tap the plus/minus icon or
press NAVIGATION left/right
to increase/decrease the
value. The live Camera
screen on the background
immediately shows the effect
of changes.
3
Tap to save the settings.
4
Tap to reset all properties to
their default.
5
Tap to close the submenu
without applying and saving
the changes.