D-Link DI-634M Manual page 38

DI-634M User's Manual
Ping Test:
Restart Device:
Block WAN Ping:
VPN Pass
Through:
Multicast
streams:
D-Link Systems, Inc.
The Ping Test is used to send Ping packets to test if a computer
is on the Internet. Enter the IP Address that you wish to Ping,
and click Ping.
Click Reboot to restart the DI-634M.
If you choose to block WAN Ping, the WAN IP Address of
the DI-634M will not respond to pings. Blocking the Ping may
provide some extra security from hackers.
Discard Ping from WAN side: Click Enabled to block the WAN
ping.
The DI-634M supports VPN (Virtual Private Network) pass-
through for both PPTP (Point-to-Point Tunneling Protocol) and
IPSec (IP Security). Once VPN pass-through is enabled, there
is no need to open up virtual services. Multiple VPN connections
can be made through the DI-634M. This is useful when you
have many VPN clients on the LAN network.
Click Enabled to allow multicast traffic to pass through the
router from the Internet.
Using the Configuration Menu
38