Entel HT642 User Manual page 8

Preparing Your Radio For Use
Attaching / Removing the Aerial
To attach, carefully align the aerial with the
1
socket. Screw in the aerial clockwise (taking
care not to cross the thread) until it is seated
firmly against the top of the radio.
To remove, unscrew the aerial
2
anti-clockwise.
Charging Your Radio
Several charger options are available. Please refer to your
charger user guide.
1
Attaching / Removing Audio Accessories
To attach, remove the accessory cover by unscrewing the
1
locking screw anti-clockwise (leave cover attached or store in a
safe place).Attach accessory plug by locating over the socket.
Carefully tighten the locking screw clockwise until finger tight
(do not tighten with a screwdriver etc).
To remove, unscrew the locking screw by hand in an
2
anti-clockwise direction (carefully use a coin or screwdriver if
too tight). Ensure you re-fit the accessory cover so as to
protect the socket.
7
cont...
2