Controls & Indicators - Entel HT642 User Manual

Antenna
Dealer
*
programmable
button
Push To Talk
7
(PTT) switch
Dealer programmable
*
button
On / Off
1
On / Off button. Press to turn radio on, press and hold to turn off.
1
Monitor button. Press to monitor channel
2
Channel scan button. Press to start/stop channel scanning.
3
Channel change buttons. Press up/down buttons to change channel.
4
Mem button.
5
Ch 16 button. Shortcut button to access channel 16.
6
PTT button. Press & hold to speak. Release to listen.
7
LED indicator.
8
• RED Steady = Transmitting
• RED flashing slowly = Battery needs re-charging
• GREEN Steady = Receiving
• GREEN flashing slowly = Non valid signal detected
• GREEN flashing rapidly = Scanning
Dealer programmable buttons (ask your dealer for more information).
*
Controls & Indicators
Monitor button
2
Ch16 button
6
Dealer
*
programmable
button
19
Volume control
LED indicator
8
Scan button
3
Channel change
4
MEM button
5
Speaker
Microphone