Chapter 4: Switching To Standard Interface - Humanware Prodigi User Manual

CHAPTER 4: SWITCHING TO
STANDARD INTERFACE
Prodigi contains two different interfaces,
Simple and Standard, which can be changed
according to your specific needs. By default,
Prodigi's interface is set to Simple (see
previous chapter for more information).
Prodigi's Standard interface allows you to
perform more touch gestures, keep your
documents in memory, and further customize
your system.
To switch your interface to Standard:
 Press and hold the Back button to
access the Settings, scroll down to
select All Settings and tap.
 Scroll down to select General and tap.
 Tap again to change the User Interface.
Scroll down to select Yes, and tap to
confirm.
Page 13