Humanware Prodigi User Manual page 38

 Press Power to exit Standby Mode.
IMPORTANT: The battery becomes warm
during recharging. Do not recharge the
battery near a heat source.
Replacing the battery:
Contact HumanWare or your authorized
distributor to obtain a replacement battery.
 Power off the Tablet and unplug it from
the outlet.
 Hold the Tablet up, its back side facing
you.
 Press the release button near the left
edge of the Tablet, and simultaneously
slide the compartment door to the left to
remove it.
 The battery's upper left edge has a tab.
Use this tab to lift the used battery up.
Note: The model and serial numbers
can be found under the battery.
 To insert the new battery: there are
connector pins on the lower right edge
of the battery. Insert the right edge first,
Page 35