Mounting; Orientation; Rigging; Procedure - Chauvet Rogue R2 Wash User Manual

Mounting

Orientation

Rigging

Procedure

Mounting Diagram
Rogue™ R2 Wash User Manual Rev. 1
Before mounting this product, read and follow the
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable (such
as CH-07 from Chauvet).
The Rogue™ R2 Wash comes with a preinstalled mounting surface to which you will be able to
attach the 2 included omega brackets. Make sure the clamps (such as CTC-50HC from Trusst)
are capable of supporting the weight of this product. Use two mounting points per product. In
addition, use a safety cable to link the product to the structure.
Floor Mounting
for the weight-bearing requirements of this
Mounting Clamp
Omega Brackets
Mounting
Surface
Overhead Mounting
Safety Notes. For our CHAUVET®
Setup
Safety Cable
-7-