Canon MG 5600 Series Online Manual page 490

*3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand
PictBridge (Wireless LAN) compliant device. (May not be available with some Canon-brand
PictBridge (Wireless LAN) compliant devices.)
Print date & Default (Off: No printing), Date, File No., Both, Off
file no.
Image Default (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye*2
optimize
*1 The scene or person's face of a shot photo is recognized and the most suitable correction for each
photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a
scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable
color, brightness, or contrasts automatically to print.
*2 Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (May
not be selected depending on the device.)
Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge (Wireless LAN) print settings from the PictBridge print settings screen.
Set the print settings to Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
This section describes the procedure to display the PictBridge print settings screen.
1. Make sure that the machine is turned on.
2. Select Setup on the HOME screen.
LCD and Operation Panel
3. Select Device settings, then press the OK button.
4. Use the button to select PictBridge print settings, then press the OK button.
5. Check the message that is displayed, then press the OK button.
The PictBridge print settings screen is displayed.
For details on the setting items:
PictBridge print settings
490