Default Values Set At Factory (Network) - Canon MG 5600 Series Online Manual

Default Values Set at Factory (Network)

Default Values of the LAN Connection
Item
Change LAN
SSID
Communication mode
Wireless LAN security
IP address (IPv4)
IP address (IPv6)
Set printer name*
Enable/disable IPv6
Enable/disable WSD
Timeout setting
Enable/disable Bonjour
Service name
LPR protocol setting
PictBridge communication Enable
Wireless LAN DRX setting Enable
("XX" represents alphanumeric characters.)
* The default value in this item varies by machine. You can check the value in this item using the
operation panel on the machine.
LAN settings
Default Values of the Access Point Mode
Item
SSID (access point name) XXXXXX-MG5600series
Wireless LAN security
Password
(XXXXXX is the last six digits of MAC address of the machine.)
The default
Disable LAN
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
Enable
Enable
1 minute
Enable
Canon MG5600 series
Enable
The default
WPA2-PSK (AES)
Serial number of the machine
248