Canon MG 5600 Series Online Manual page 175

5. Prepare a new ink tank.
1. Take a new ink tank out of its package, remove the orange tape (
remove the protective film (
Important
• Handle an ink tank carefully. Do not drop or apply excessive pressure to it.
• If the orange tape remains on the Y-shape air hole (D), ink may splash or the machine may not
print properly.
2. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to
block the Y-shape air hole (D).
3. Lift up the tab on the orange protective cap (E) to remove it off GENTLY.
) completely.
175
) completely, then