Page 1
OPERATING & MAINTENANCE MANUAL MANUEL DE FONCTIONNEMENT & D'ENTRETIEN...
Page 2
Contact your local building or fire officials about restrictions and installations inspection requirements in your area. Save these instructions Manufactured by: MCZ GROUP S.p.A. Via La Croce n°8 33074 Vigonovo di Fontanafredda (PN) – ITALY Telephone: 0434/599599 r.a. Fax: 0434/599598 Internet: www.mcz.it...
3.4.3. PREPARATION AND UNPACK ING ....................28 3.5. CONNECTIONS OF HOT AIR DUCTS FOR SUITE/CLUB/MUSA COMFORT AIR MODEL ......31 3.6. INSTALLATION OF CERAMIC CLADDING FOR SUITE AND CLUB ............32 3.7.
Page 4
CLEANING THE LOWER COMPARTMENT .................. 74 5.2.2. Shutting the stove down (end of season) ................. 74 5.2.3. Check of internal components ....................74 5.2.4. Contents Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 5
SUITE / CLUB / MUSA AIR ...................... 95 8.3.1. TOBA AIR ..........................97 8.3.2. SUITE / CLUB / MUSA COMFORT AIR ..................99 8.3.3. Contents Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Indicates a sequence of buttons to be pushed to access menus or to make adjustments. MANUAL Indicates that you should carefully read this manual or the related instructions. Introduction Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
In such cases MCZ is absolved from any civil or criminal responsibility. Warnings and guarantee conditions Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Always keep the cover of the pellet hopper closed. Keep this instruction manual in a safe place. If it gets lost, ask MCZ or your authorised dealer for another copy. Warnings and guarantee conditions Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
For all replacement of parts, only original MCZ spare parts must be used. Warnings and guarantee conditions Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
MCZ pellet stoves run exclusively on pellets with a diameter of 6-8 mm with lengths from ¼” to 1 ½”. Theoretical notions for installation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
This can be accomplished by connecting the outside air feature on the stove or by providing a ventilated wall pass through 15 sq in min. Theoretical notions for installation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
For this reason and the fact that the Suite/Club/Musa operates with a positive vent pressure, we specify that the joints also be sealed with high-temp silicone. 78.7” - 117” MAX Connect the stove to listed 3”...
Page 13
Position the stove bearing in mind all the instructions and considerations above. See Page 20 for further details of vent configurations. Theoretical notions for installation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Hazardous conditions can only be overcome by suitable setting-up of the stove carried out by qualified MCZ personnel. Theoretical notions for installation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
COLD AIR INLET 22.54 3.1.2. Dimensions SUITE mod. AIR – COMFORT AIR COMFORT AIR 12.6 HOT AIR OUTLET 2.34 1.17 8.81 7.29 16.10 Ø3.12 Ø1.95 22.54 Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Chapter 3 INSTALLATION AND USE MANUAL page IMPORTANT! The hole in CLUB, SUITE and MUSA stoves for hot air outlet, located at the top to the rear of the stove, is only present for the COMFORT AIR model. 3.1.5. Technical characteristics Technical characteristics CLUB –...
Page 18
120 Volts / 60 Hz Net weight 140 Kg. Weight with packaging 150 Kg. * Data that may vary depending on the type of pellets used. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
When installing and operating your MCZ Suite/Club/Musa Pellet Stove, respect basic safety standards. Read these instructions carefully before you attempt to install or operate the Suite/Club/Musa. Failure to do so may result in damage to property or personal injury and may void the product warranty.
Floor fixing of the appliance point where air is drawn in to insure that it is clear leaves/debris and ice or snow. Due to high temperatures, the Suite/Club/Musa should be placed out of traffic and away from furniture and draperies. Children and adults...
MCZ assumes no responsib ility for, nor does the warranty extend to, smoke damage caused b y reverse drafting of pellet appliances under shut-down or power failure conditions. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
This vertical section will provide natural draft in the event of a power failure. Note: do not place joints within wall pass-throughs. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
8 X 8 inches, you should refer to Method #5. If choos-ing this method, increase the vent pipe to 4 in. at the stove. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
The pipe or liner inside the chimney should be 4" diameter and approved for pellet venting.In this method a cap should also be installed on the chimney to keep rain. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
It is required that outside air be installed with this venting configuration to reduce smoke and creosote smell in the room in the event of power failure. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
2 sides beneath the floor. NOTE: Where passage through a wall, or partition of combustible construction is desired, the installation shall conform to CAN/CSA- B365. (if in Canada) Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 27
PELLET STOVES Chapter 3 INSTALLATION AND USE MANUAL page = Venting Terminal = Air Supply Inlet = Area where termination is not permitted Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
To open the packaging, remove, for the Suite, Club and Toba stoves, the two brackets that lock the stove to the pallet (one on the right and Figure 1 – Example of stove packaging one on the left side-fig.3), while for the Musa stove remove the screws...
Page 29
Position the stove without its cladding and connect it to the flue pipe. Once the operations for connection are complete, assemble the cladding (ceramics or steel sides). Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 30
Piedino J 1. Turn the feet clockwise to lower the stove 2. Turn the feet counter- clockwise to lower the stove Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
It is possible to choose the volume of air you wish to discharge from the front part and from the rear part of the stove in an independent manner, by adjusting the ventilation power directly with the remote control. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Assembly of the lower panel – Suite and Club Stoves 3.7.1. The stove is delivered with all the ceramics packed. Therefore, before assembling the side tiles and the top, it is necessary to insert the lower panel.
Install the top by setting it on the four upper protuberances of the stove. The part underneath is provided with four small cavities at the rubber supports indicated in the figure Supports for installation of ceramic top Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
The rear side must be fixed to the stove's structure using the four screws G provided. When both steel sides A are assembled, replace the cast iron top. REAR VIEW Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
(a) found on the base of the stove. Once in position secure the side panel onto to upper part of the stove using the two screws (b-c). Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 36
The top lies on the upper part of the stove making sure that the holes on the top enter the plugs A-B on the side panels. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 37
On the part in front of the top there is a grille G for hot air output. This grill G has tilted tabs which guide the air in front or behind the stove depending on how it is positioned. Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Fig. 1 - Opening/closing the door Suite/Club/Musa In Suite/Club/Musa stoves the door is opened using the hook on the door which must be lifted by the cool hand supplied (fig.1); whereas for the Toba stove slide the cool hand onto door hook, lift and pull (fig.2).
When the stove is not b eing used, it is advisable to keep it unplugged. Electrical connection of the stove Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Try to get familiar with the commands given from the control panel or remote control. Try to memorize the messages that the stove provides on the display of the remote control. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
The remote control has bright back-lighting which is activated by simply pressing a key. Position of the room temperature probe Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
6. The MENU button lets you access setting menus for ventilation, SLEEP mode and TIMER 7. Support base that contains the battery compartment Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
TIMER is active. I f the icon is com pletely on, it ind icates 19, it indicates that you are choosing a p ersonalized weekly TIMER setting mode. programme (which requires the insertion of daily time periods -> 24h) Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
The batteries provided may have a limited lifespan. When replacing the batteries, ensure correct polarity observing the symb on the internal compartment of the remote control. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
G. button to connect the stove to a new remote control (by means of a procedure explained below) TO OPERATE THE STOVE WITH THE REMOTE CONTROL, SELECTOR "D" MUST BE PLACED ON “REMOTE” Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
3, the cooling-off After the stove is shut down procedure begins. This includes interruption fuel loading, cleaning of the grate continuation of ventilation until the stove is sufficiently cold. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Once the remote control is working again, remember to put selector "D" b ack in the "REMOTE" position. Otherwise the stove will disregard inputs from the remote control. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
MAX appears under the flame symbol. This indicates that maximum performance of the stove has been reached. In this operating mode, the flame symbol is completely on. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
To change from MANUAL to AUTOMATIC mode, press button 4 so that the remote control display shows the message MAN and the bars for the adjustment of flame power. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
4 for 5 seconds. AUTO along The display of the remote control will show the message with the message ECOSTOP. To disable the ECO-STOP function follow the same procedure. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
In power 4 and 5 the automatic ventila tion always maintains level 3, to ° F ° F ° F ° F make the use easier. Ventilation 4 and 5 can be set only manually. AUTO Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
6 again or wait 7 seconds. After returning to normal operation, instead of showing the current SLEEP time, the display will show the countdown of time remaining shutdown. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
If none of the 10 pre-set programmes meets your personal heating needs, you can put together a PROGRAM personalized weekly programme ( P99) that suits you best (see next paragraph). Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 54
As soon as the daily programme is co nfirmed with the key 4, the remote control moves to the next day. Repeat the setting operations described above for all the days of the week. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
5 to select: PROGRAM ° F ° F Then wait 7 seconds for confirmation or again press button 6 to confirm. This de-activates the TIMER. PROGRAM Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
P99 using one of the 60 different programmes for each single day of (see chapter 4.11.2 the week PROGRAMMES HOURS DAYS Mon-Fri Sa-Su Mon-Fri Sa-Su Mon-Fri Sa-Su Mon-Fri Sa-Su Mon-Fri Sa-Su Mon-Fri Sa-Su Mon-Sa Mon-Sa Mon-Sa Sa-Su Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 4 INSTALLATION AND USE MANUAL page Daily programmes 4.12.2. Programmi Tabella orari giornalieri N° Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 58
PELLET STOVES Chapter 4 INSTALLATION AND USE MANUAL page Programmi Tabella orari giornalieri N° Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
SUNDAY at home only after 14:00 Based on these times, from the table in paragraph 4.12.2 the daily programmes are selected which best suit this routine. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 60
TU= Tuesday and the symbol will light up TU = Tuesday starts flashing. The dash shows that a WE=Wednesday will start flashing. timer programme has been set for that day. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
After that time, a lock symbol will appear at the upper left of the display to confirm that the keys are locked. To deactivate the lock, repeat the operation described above. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
FAILURE TO LIGHT If during ignition no flame develops, the stove will go into alarm condition. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
OFF on the remote control to cancel the alarm Overheating of the stove body A03. Once the alarm is cancelled it is possible to relight the stove normally. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 64
Periodic maintenance warning before the maintenance have elapsed and a maintenance intervention is necessary. Contact a specialist MCZ technician. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Only after the cause of the blockage has been permanently eliminated can a fresh attempt to relight the stove b e made. Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
It is however advisable not to let it exceed 2 or 3 days. Once the operation is finished, reinsert the ash drawer below the grate making sure it is well inserted Cleaning the ash collection compartment Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Never operate the stove without the air filter. MCZ shall not be held liab le for damage to internal components if this instruction is not followed. Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
P, lift it slightly and extract the fans. 8. Remove the exchanger O by unscrewing the 4 screws that secure it Clean and refit all the components by using a new front gasket. Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 69
PELLET STOVES Chapter 5 INSTALLATION AND USE MANUAL page Cleaning the upper exchanger (Musa Comfort Air stove) FRONT GASKET Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
8. Remove the exchanger O by unscrewing the four screws that secure it Clean and refit all the components by using a new front gasket. Cleaning the upper exchanger (Suite and Club stove) Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
5. Remove the plug V by unscrewing the screws 6. Remove the exchanger O by unscrewing the four screws that secure it Clean and refit all the components by using a new front gasket. Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
2. Remove the front panel D by unscrewing the screws 3. Remove the exchanger O by unscrewing the four screws that secure it Clean and refit all the components using a new front gasket C. Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 73
PELLET STOVES Chapter 5 INSTALLATION AND USE MANUAL page Cleaning the upper exchanger Toba stove (Air version) Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
We recommend that an annual maintenance service is carried out, preferably under a programmed service contract. The essential part of this service is a visual and functional check on the internal components: Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 75
● Glass ● Lower heat exchanger ● Complete exchanger ● Smoke duct ● Door seal ● ● Air filter ● Flue pipe ● Remote control battery Maintenance and cleaning Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Check the state of the door gaskets. Pellets damp or unsuitable. Change the type of pellet. Smoke extractor motor broken. Check the motor and replace necessary. Problems/ causes/ solutions Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 77
The operations marked in b old type must b e carried out by specialised MCZ personnel. The manufacturer refuses to accept any responsib ility and the guarantee lapses if this condition is not respected. Problems/ causes/ solutions Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
6. Ignition plug 12. Air flow sensor 7. Flue-gas extractor fan N.B. The electrical wiring of the single components includes pre-wired connectors which are of different sizes. Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8. SPARE PARTS EXTERNAL STRUCTURE COMPONENTS 8.1. 8.1.1. SUITE AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 80
41200804950 Anterior Painted upright 41200805050 Posterior painted upright 412508051 Side ceramics Bordeaux 412508052 Side ceramics Terra di Siena 412508053 Side ceramics Sale&Pepe 4160457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.1.2. CLUB AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 82
Anterior Painted upright 41200805050 Posterior painted upright 412508081 Side ceramics White 412508082 Side ceramics Bordeaux 412508083 Side ceramics Sand 412508084 Side ceramics Black 4160457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.1.3. MUSA AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 84
Anterior painted upright 41400904300 RH-LH steel side White 41400904400 RH-LH steel side Dark 41400904500 RH-LH steel side Silver 41400904600 RH-LH steel side Bordeaux 4160457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.1.4. TOBA AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 86
41400945661 Steel external back 41400904962 Steel top painted black 41400946060 R.-L. Steel side 41310900660 Black painted base 4120618 Support feet (4 pcs) 4060457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.1.5. SUITE COMFORT AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 88
Posterior painted upright 412508051 Side ceramics Bordeaux 412508052 Side ceramics Terra di Siena 412508053 Side ceramics Sale&Pepe 41400910500V Hot air diffuser 41400916930V Protection grille 4060457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.1.6. CLUB COMFORT AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 90
Side ceramics White 412508082 Side ceramics Bordeaux 412508083 Side ceramics Sand 412508084 Side ceramics Black 41400910500V Hot air diffuser 41400916930V Protection grille 4060457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.1.7. MUSA COMFORT AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 92
41400904400 RH-LH steel side Dark 41400904500 RH-LH steel side Silver 41400904600 RH-LH steel side Bordeaux 41400910500V Hot air diffuser 41400916930V Protection grille 4060457 power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page ELECTRONIC AND MECHANICAL INTERNAL 8.3. COMPONENTS 8.3.1. SUITE / CLUB / MUSA AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 96
41200901040 Pellet feed screw 414008042 9 Conduit of feed screw 418008029 Gasket 41450906400 LCD Remote control 412007004 Clickson 230°F 41450906300 Emergency panel 4160457 Power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.3.2. TOBA AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 98
Base of feed screw conduit 41200901040 Pellet feed screw 414008042 Conduit of feed screw 418008029 Gasket 41450901500 Remote control 412007004 Klixon 110°C 41450900700 Emercency panel 4160457 Power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
PELLET STOVES Chapter 7 INSTALLATION AND USE MANUAL page 8.3.3. SUITE / CLUB / MUSA COMFORT AIR Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 100
Conduit of feed screw 418008029 Gasket 41450906400 LCD Remote control 41450903500 Fan motor capacity 170 m3/h 418008018 Fan gasket 412007004 Clickson 230°F 4160457 Power supply on-off button Electrical diagrams Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited...
Page 101
MCZ GROUP S.p.A. Via La Croce n°8 33074 Vigonovo di Fontanafredda (PN) – ITALY Telephone: 0434/599599 r.a. Fax: 0434/599598 Internet: www.mcz.it e-mail: mcz@mcz.it 8900915802 Rev 2 06/2011...
Need help?
Do you have a question about the CLUB and is the answer not in the manual?
Questions and answers