Creation Of New Takes When Restarting Recording; Setting The Name Given To Recording; Takes - Tascam projector Owner's Manual

4 – Recording
Creation of new takes when restarting
recording
Set whether the unit continues recording to the same
take or begins a new take when restarting recording. This
setting determines the take recorded to when you press
the REC button again after having pressed the PAUSE
button to put the unit in recording standby.
1. Press the MENU button to open the
screen.
MENU
2. Use the DATA wheel to select the
press the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options.
(default value): Continue recording to the
SAME TAKE
:
NEW TAKE
4. Press the MARK (.) button to return to item
selection on the
MENU
5. Press the HOME/DISP button to return to the Home
Screen.
26
TASCAM DR-680MKII
page of the
REC
item, and
PAUSE
same take.
Record to a new take.
screen.

Setting the name given to recording

takes

Set whether take names are based on the date or one of
three names that have been created on the
screen.
1. Press the MENU button to open the
screen.
MENU
2. Use the DATA wheel to select the
the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options.
(default value): The take name is based on the
DATE
date.
: The take name is based on a user
USER 1
word defined on the
ED I T
: The take name is based on a user
USER 2
word defined on the
ED I T
: The take name is based on a user
USER 3
word defined on the
ED I T
4. Press the MARK (.) button to return to item
selection on the
MENU
5. Press the HOME/DISP button to return to the Home
Screen.
NAME ED I T
page of the
REC
item, and press
NAME
USER WORD
screen.
USER WORD
screen.
USER WORD
screen.
screen.