Setting The File Recording Mode; Stereo Track Recording Settings; Creation Of New Takes When Restarting Recording - Tascam DR-680 Owner's Manual

4 Use the wheel to select one of the following
DATA
options: (default value),
44 . 1 k Hz
or .
1 92k Hz
NOTE
When the file format is MP3, 96 kHz and 192 kHz cannot
be selected.
5 Press the key to return to the selection of
items on the screen.
REC
6 Press the key to return to the
MENU
Press the
HOME/FUNC
Screen.

Setting the file recording mode

The file recording mode can be set to a monaural file, a
stereo file or a 6-channel file.
1 Press the key to open the
MENU
2 Use the wheel to select the
DATA
and press the
ENTER
3 Use the wheel to select the
DATA
press the key or
ENTER
4 Use the wheel to select one of the following
DATA
options: ,
MONO STEREO
NOTE
When set to MONO, a mono file is created for each
•
recorded track. When set to STEREO, a stereo file
is created for each pair of tracks (1-2, 3-4 and 5-6).
When set to 6ch, one 6-channel file is created for
tracks 1-6.
6ch cannot be selected when the file format is set to
•
MP3 or the sampling frequency is set to 192 kHz.
5 Press the key to return to the selection of
items on the screen.
REC
6 Press the key to return to the
MENU
Press the
HOME/FUNC
Screen.
,
48k Hz 96k Hz
screen.
MENU
key to return to the Home
screen.
MENU
menu item,
REC
key to open the screen.
REC
item, and
F I LE
key.
(default value), or .
6ch
screen.
MENU
key to return to the Home

Stereo track recording settings

You can set what is recorded on the stereo track.
1 Press the
MENU
2 Use the
DATA
and press the
,
3 Use the
DATA
press the key or
4 Use the
DATA
options.
(default): Record a mix of the 6 inputs on the
M I X
:
D I N
5 Press the key to return to the selection of
items on the
REC
6 Press the
MENU
Press the
HOME/FUNC
Screen.
Creation of new takes when restarting
recording
Set whether the unit continues recording to the same
take or begins a new take when restarting recording.
This setting determines the take recorded to when
you press the
REC
key to put the unit in recording standby.
PAUSE
1 Press the
MENU
2 Use the
DATA
and press the
3 Use the
DATA
press the key or
4 – Recording
key to open the
MENU
wheel to select the menu item,
REC
key to open the
ENTER
REC
wheel to select the
ST REC
key.
ENTER
wheel to select one of the following
stereo track.
Record the signal from the
input jack on the stereo
SYNC IN
track.
screen.
key to return to the
MENU
key to return to the Home
key again after having pressed the
key to open the
MENU
wheel to select the menu item,
REC
key to open the
ENTER
REC
wheel to select the
PAUSE
key.
ENTER
TASCAM DR-680
screen.
screen.
item, and
DIGITAL/
screen.
screen.
screen.
item, and
25