Table of Contents
Advertisement
DIN/MIX monitor settings
When the
item on the
ST REC
screen is set to
, the signal to be monitored can be
D I N
selected. Press the VALUE/MARK knob to select
or
.
M I X MON
The default value is
M I X MON
: Set to monitor the stereo mix
: Set to monitor the digital input
NOTE
When the
item on the
ST REC
, this setting is fixed to
M I X
changed to
.
D I N MON
Limiter activation
Use the
item to turn the limiter function ON or
L I M I TER
OFF for each input independently.
The limiter for an input is ON when its number appears
light on a dark background. The default value is OFF for all
inputs.
Press the VALUE/MARK knob to turn the limiter ON or OFF
for all inputs at the same time.
Press the channel number (1–6) buttons to turn the limiter
ON or OFF for each input independently.
If the limiter has been turned ON for one or more inputs,
the
indicator appears with a dark background.
L I M I TER
: Limiter ON for all inputs
: Limiter ON for input 1
: Limiter OFF for all inputs
Low-cut filter activation
Use the
item to turn the low-cut filter function
LOW CUT
ON or OFF for each input independently.
The low-cut filter for an input is ON when its number
appears light on a dark background. The default value is
OFF for all inputs.
Press the VALUE/MARK knob to turn the low-cut filter ON
or OFF for all inputs at the same time.
Press the channel number (1–6) buttons to turn the
low-cut filter ON or OFF for each input independently.
If the low-cut filter has been turned ON for one or more
inputs, the
indicator appears with a dark
LOW CUT
background.
: Low-cut filter ON for all inputs
: Low-cut filter function ON for
input 1
: Low-cut filter OFF for all inputs
NOTE
You can set the cut-off frequency with the
item of the
menu. (See "Using the low-cut
LOW CUT
filter" on page 35.)
2 – Names and Functions of Parts
page of the
REC
MENU
D I N MON
.
page is set to
REC
, and it cannot be
M I X MON
FREQUENCY
19
TASCAM DR-680
Advertisement
Table of Contents
