Karma KM-5000 recliner Series Owner's Manual page 18

4.1.3.5 Important Do's and Don'ts
Do: Keep axles clean and lubricated with light oil or maintenance spray.
Do: Maintain correct tire pressure if using pneumatic tyres(tires).
Do not: Try to remove the wheels while the wheelchair is occupied even when
using anti-tip levers.
4.1.3.6 Safety Belt
How to assemble and disassemble the Safety Belt
Loosen the fourth and fifth screws of both side of seat upholstery and insert the
Safety Belt in between the fourth and fifth screw holes. (Figure 4.27)
Keep the safety Belt in 45 deg for comfortable usage. (Figure 4.28)
Put the seat upholstery back and tighten screws.
Adjusting length of seat belt
Identify the require length of the belt. (Figure 4.29)
Push the two part of belt through buckle to make the belt longer or shorter.
(Figure 4.30)
Pull the two part of belt tight. (Figure 4.31)
Push buckle up to the plastic clip so that the belt can not slip out of position.
Figure 4.25
Figure 4.27
Figure 4.26
Figure 4.28
12