Diagnostic Information; Start; Power-On Self Test (Post) Sequence - Lexmark X5100 Series Service Manual

4407-XXX

2. Diagnostic Information

Start

Use the symptom tables, service checks, and diagnostic aids in
chapter three, to determine the printer failure.

Power-On Self Test (POST) Sequence

Press the power button to turn machine on.
•
The Power indicator light turns on.
•
The Charge-Coupled Device (CCD) lamp turns on and the
scanner moves to the left, then returns to the right.
•
The paper feed motor runs then stops.
•
The carrier moves to the right then returns to the left stopping at
the maintenance station.
•
Power light stays on.
•
The message below is displayed on the LCD.
If your printer completes POST with no errors, go to the
Tables" on page
action.
If your printer does not complete POST, locate the symptom in the
following table and take the indicated action.
1
PY
Normal Quality
2-3, locate the symptom and take the indicated
1
Diagnostic Information
"Symptom
2-1