Cleaning and Maintenance
Note: Before cleaning or removing the grinder attachment from the stand mixer, always turn the unit "off" and unplug
the stand mixer's cord from the outlet.
Cleaning: Grinder attachment parts can be removed and disassembled from the stand mixer for thorough cleaning
as described in previous sections. Wash the locking ring, grinding plate, cutting blade, auger, feed/grinding tube, food
pusher and hopper in warm soapy water with a soft cloth or sponge. Blow away water from the holes in the grinding
plate. (Tip: A hair dryer works very effectively, but do not use the "high" heat setting.) Careful! The cutting blade has
very sharp edges and the holes in the grinding plate also have sharp edges. Keep hands clear! After cleaning, coat
the grinding plate, cutting blade, auger and locking ring sparingly with vegetable oil or other USDA approved food
Never use steel wool or scouring powder on any parts.
DO NOT WASH ANY OF THE PARTS OF THE GRINDER ATTACHMENT IN A DISHWASHER.
This attachment is for household use only. In the event service is needed, you may return your food grinder attachment
to EdgeCraft Corp., where the cost of repair or mechanical adjustment can be estimated before the repair is undertaken.
Please include your return address and a brief description of the problem or damage to the grinder attachment on a
separate sheet inside the box.
Send your grinder attachment only, insured and postage prepaid to address below. Retain evidence of shipping for
is a registered trademark of KitchenAid USA. This is not a product of KitchenAid
© EdgeCraft Corporation 2013
Limited Warranty: Used with normal care, this EdgeCraft product is guaranteed against defective material and workmanship for a period of one (1) year from the
date of original purchase ("Warranty Period"). We will repair or replace, at our option, any product or part that is defective in material or workmanship without charge
if the product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This warranty does not apply to commercial use* or any
product abuse. ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on
how long an implied warranty lasts and some states do not allow exclusions or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. *For commercial use
warranty, please contact your dealer or EdgeCraft.
EdgeCraft Corporation, 825 Southwood Road, Avondale, PA 19311 U.S.A.
Telephone 800-342-3255 or 610-268-0500
or Whirlpool Corp.