Toshiba D-VR3SU Service Manual page 21

4) Press the ENTER button on the remote control.
5) It takes about 1~2 minutes to finish a update.
The message on the screen will be displayed after finishing a update and the tray will be opened
automatically. And then do not turn off the unit until it goes off automatically.
6) After removing a update disc, turn on the unit with power button and press REW and FF button on
the front panel at the same time during 5 seconds.
"CLR" will be displayed on the front display and next screen will be displayed.
Check the update version number. Finally, the Drive Firmware update is ended.
You can see "LOAD" on Front Display.
Reference Information
2-11