Toshiba D-VR3SU Service Manual page 84

Disassembly and Reassembly
5-4-23 Slider S, T Ass'y Removal
1) Move the Slider S, T Ass'y Œ, ´ to slot, and then
lift it to remove. (Refer to arrow)
ΠSLIDER S ASS`Y
Fig. 5-36 Slider S, T Ass'y Removal
5-18
5-4-24 Plate Ground Deck, Cylinder Ass'y Removal
1) Remove the 3 Screws Œ.
2) Lift the Plate Ground Deck ´.
3) Lift the Cylinder Ass'y ˇ.
Assembly :
1) Match the 3 holes in the bottom of Cylinder ass'y
ˇ to the 3 holes of Main Base as attending not to
´ SLIDER T ASS`Y
drop or knock the Cylinder ass'y ˇ.
2) Tighten the 1 Screw Œ.
3) Match the Plate Ground Deck ´ to the Hole of
Base Main.
4) Tighten the other 2 Screws Œ.
Note :
1) Take care not to touch the Cylinder Ass'y ˇ and
the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much on
Screw Driver.
Π3 SCREWS
Fig. 5-37 Plate Ground Deck, Cylinder Ass'y Removal
´ PLATE GROUND DECK
ˇ CYLINDER ASS'Y