Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for GO SwissDrive EVO
- Page 1 ORIGINAL INSTRUCTION MANUAL EVO control unit...
-
Page 2: Component Description
COMPONENT DESCRIPTION Display 7 –Key Docking station 8 Scroll key Handlebar remote 9 Lever display fixing On/Off key 10 Fixing handlebar Confirm key Contacts +Key 12 USB interface... - Page 3 – Institut für Fahrradtechnik und -Sicherheit GmbH. your Evo control unit or your complete pedelec/e-bike to someone else. © GO SwissDrive AG We wish you a great deal of enjoyment and good riding with our Evo control unit. www.go-swissdrive.com The GO SwissDrive Team ©...
- Page 4 It offers you a huge number of functions and individualisation options. The following the docking station (3). chapter is a short overview with the description of the basic operation of the Evo con- trol unit. You will find a detailed description of all functions and configuration options To remove the display press down the lever on the upper edge of the docking station of the Evo control unit in the following chapters.
- Page 5 Configuration menu: Confirmation of selected options and settings. In the driving mode the display of the Evo control unit is subdivided in five sections +/–Keys (1c): With the +/–keys you can adjust the assistance level of the GO (3): SwissDrive system during the ride.
-
Page 6: Basic Settings
The current speed of the pedelec/e-bike is indicated with one digit behind the deci- mal point. Before you set off with your GO SwissDrive system you should do a few basic set- tings. This applies in particular to the circumference of tyre, the preferred language The speed is only indicated correctly if the circumference of tyre of as well as the date and the time. - Page 7 “System settings“ and then press the Confirm key. Continue by navigating in the menu of your Evo control unit and select and confirm settings in the configura- with the +/–keys to the desired language and then press the Confirm key again.
- Page 8 Scroll key (4): With the Scroll key you can switch between the individual menus correspondingly strongest at the lowest level (–2) (2). of your Evo control unit. The series of the menus is predetermined and cannot be Throttle mode: Pressing the +key long in the driving mode activates the throttle changed.
- Page 9 4.1. Menus in operation during the ride The menu position indicates the selected screen with a symbol. In the driving mode the display of your Evo control unit is subdivided into five sec- tions (1): In the variable section you can select between the main menu, an overview of the status bar (1a), data relating to the current tour and a stop watch function.
- Page 10 Whether your mobile phone supports the Bluetooth 4.0 standard can be gathered In the standstill mode the display of your Evo control unit is subdivided into three sec- from the operating manual of your mobile phone. The current state of the connection tions already described in the preceding section: the status bar, the menu position is visualised by means of the Bluetooth symbol.
- Page 11 Temperature warning (3): The display can show early warnings to prevent possible errors in the GO SwissDrive system at an early stage. This includes in particular the warning concerning overheating of the motor and the battery. Before the motor or the battery overheat and correspondingly begin to reduce their performance for system protection reasons, you are informed on the display.
-
Page 12: Main Menu
79% - 70% The main menu provides the essential information required during the ride. This menu is displayed by default whenever you switch on the GO SwissDrive system. Besides the display of the assistance level and the current speed which is obliga-... - Page 13 You can determine the start point of a tour on your own. In this regard the Evo control unit offers you three different options: When the tour menu is indicated, you can reset...
- Page 14 You can adjust the cir- cumference of tyre in the settings (see chapter “Configurations and Your Evo control unit offers you the option to connect a mobile phone via Bluetooth settings”). 4.0. Instructions on how to connect a mobile phone are given in the chapter “Confi- gurations and settings”.
-
Page 15: Data Storage
If an external device is connected with the Evo control unit via one of these two inter- indicating that a new call or a new SMS was registered in the phone menu. In the list faces, you can select one of four storage variants in the menu “Data storage”... -
Page 16: System Settings
A full description of the individual submenus is given in the following chapters. In case there will arise any questions or problems during the configu- ration of the Evo control unit described in the following, contact your 13.1. System settings dealer. -
Page 17: Date And Time
100% the automatic control is disabled and the backlighting is always at maxi- mum regardless of the ambient brightness. Your Evo control unit has an integrated Bluetooth chip and can be connected via Blu- etooth 4.0 with various compatible devices, such as for ex. mobile phones. Whether The automatic brightness sensor is not enabled in all variants of the your mobile phone supports the Bluetooth 4.0 standard can be gathered from the... -
Page 18: Screen Selection
Confirm key. If you want to disable the currently Now, your Evo control unit tries to set up a connection with a mobile phone in the active parameter without selecting a new parameter, navigate with the +/–keys to the vicinity. - Page 19 Early warnings (6): To avoid a possible overload of your GO SwissDrive system the phone, calls coming in on this mobile phone are visualised with a pop-up on the Evo Evo control unit can indicate early warnings. This includes in particular the warning display.
- Page 20 GO SWISSDRIVE 15. CHARGING A MOBILE PHONE VIA USB Do not use your Evo control unit if it is damaged. There may be the risk „ of unforeseeable damage. Contact your dealer immediately. CONNECTION Do not remove or mount the display if you are in a potentially explosi- The docking station of your Evo control unit has a USB interface (2).
- Page 21 (e.g. thinners, benzene, ink, make-up etc.). Use a soft, lint-free and dust-collecting rag for cleaning. Do not try to repair your Evo control unit on your own. Opening the display (3), the docking station or the handlebar remote results in Do not use cleaning agents containing alcohol.
-
Page 22: Technical Data
18. TECHNICAL DATA „ The following table lists an overview of the most important technical data of your Evo control unit. Parameter Min. value Type value Max. value Unit Temperature range storage °C Temperature range operation °C Temperature range USB char- °C... - Page 23 Industriestrasse 4 P.O. Box 159 CH-9473 Gams SWITZERLAND info@go-swissdrive.com www.go-swissdrive.com...