Table of Contents
Advertisement
5.
USB 2.0 connectors (Type A: USB13; 10-1 pin USB910; USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 speciication that supports up to
480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) irst, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
ASUS ESC1000 G2
®
3-25
Advertisement
Table of Contents
