Asus ESC1000 G2 User Manual page 145

Workstation
Hide thumbs Also See for ESC1000 G2:
Table of Contents

Advertisement

Updating the BIOS ile
To update the BIOS ile using BIOS Updater
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
1.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
BOARD:
VER:
DATE:
PATH:
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3.
Press <Tab> to switch between screen ields and use the <Up/Down/Home/End> keys
to select the BIOS ile and press <Enter>. BIOS Updater checks the selected BIOS ile
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
4-62
ASUSTek BIOS Updater for DOS V1.18 [2012/03/23]
Current ROM
P9X79 WS
0903
03/23/2012
A:\
P89X79WS.ROM
[Tab] Switch
[B] Backup
Are you sure to update BIOS?
Yes
No
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit BIOS menu.
Ensure to connect all SATA hard disk drives after updating the BIOS ile if you have
disconnected them.
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
4194304 2012-03-23 17:30:48
[V] Drive Info
[Esc] Exit
Chapter 4: BIOS setup

Advertisement

Table of Contents
loading

Table of Contents