Table of Contents
Advertisement
2.8.1
Installing an expansion card
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
Lay the system on its side on a lat, stable surface.
3.
Push down the expansion card lock latch (step a) and lift up the expansion card lock
(step b), as shown in the right igure.
4.
Remove the metal slot cover opposite
the slot where you wish to install an
expansion card.
5.
Align the card golden ingers with the
slot, and then press irmly until the card
is completely seated on the slot.
2-20
Expansion card lock latches
Expansion card locks
a
b
Chapter 2: Hardware setup
Advertisement
Table of Contents
