Krups XP6040 User Manual page 21

KR_ESPRESSO-COMBI_XP6040_NAFTA_NC00023128-03 20/01/12 14:46 Page23
n Ensure that the filter holder is correctly positioned (i.e. fully inserted into its opening) (Fig.9).
n Place a #4 paper filter in the filter holder (Fig.10).
n Using a dosing spoon, fill the paper filter with ground coffee depending on the numer of cups required.
IMPORTANT
We recommend 1 level dosing spoon of ground coffee for a 100 ml cup. You can adjust the
dosage to your taste and the brand of coffee used.
n Close the coffee lid until you hear the click indicating that it is firmly locked. Apply pressure on the front
and back of the lid to close firmly.
n Position the coffee pot on the warming plate.
IMPORTANT
Ensure that the coffee pot is well positioned to de-activate the anti-drip device. Otherwise the
coffee cannot be dispensed.
n Check that the rotating control button is set to PENDING (
n Check that the START/STOP button (h7)
is off.
n Press the FILTER COFFEE button (h2)
on and the coffee is dispensed after a few seconds.
n Once all of the coffee has been dispensed you can remove the coffee pot and serve.
n If you do not return the FILTER COFFEE button
(h1) remains on and the keep warm function for the coffee pot remains active.
IMPORTANT
Thanks to the anti-drip device, you can remove the coffee pot at any time to serve coffee during
dispensing, then return quickly to the plate to continue percolation.
IMPORTANT
Two hours after the coffee has been dispensed, the keep warm function automatically stops and
the FILTER COFFEE (h1) light goes out.
Important
- If the keep warm function is deactivated manually, do not reactivate if the tank
is empty.
- Never place the coffee pot on a hotplate, in an oven or microwave.
Important
To prevent the risk of burns:
- Never open the lid while coffee is being dispensed.
- Never place your face or any part of the body near the vapor release holes
located along the edge of the lid.
- Only handle the coffee pot using its handle and never touch the warming plate.
- Allow the appliance to cool before re-using for a second time.
n Once the appliance has cooled, open the lid by pressing the left side.
n Remove the filter holder using the handles.
n Remove the filter paper and throw away.
n Rinse the filter holder under warm water and dry before re-positioning.
●
).
●
I / is to the ( ) setting and the TEMPERATURE light (h6)
I /
to the (l) setting.The FILTER COFFEE light (h1) comes
●
((h2) to the (
I /
) setting, the FILTER COFFEE light
English
23