Krups XP6040 User Manual page 14

KR_ESPRESSO-COMBI_XP6040_NAFTA_NC00023128-03 20/01/12 14:46 Page16
English
C: Espresso function
Preparing the machine
n Check the water level in the tank and fill if necessary.
n Check that the rotating control button is set to PENDING (
SELECTION button (h5) is at ESPRESSO/HOT WATER
n Switch the machine on by turning the START/STOP button (h7) to the (I) setting.
n The TEMPERATURE light (h6) flashes.
IMPORTANT
While the TEMPERATURE light (h6) flashes, none of the ESPRESSO functions can be used.
n Insert the filter holder into the group head by aligning the handle with the marking "INSERTION" and
lock by moving the filter holder from left to right (Fig.15).
Adjusting the cup rest grill
The height of the cup rest grill can be adjusted.
n When using large cups, dessert glasses and mugs, leave the grill on the bottom level.
n When using espresso cups, raise the cup rest grill by pressing on the 2 height adjustment buttons at
the same time (Fig.13).
IMPORTANT
To return the cup rest grill to the lower level, press the 2 adjustment buttons at the same time.
n Place 1 or 2 cups (as necessary) on the cup rest grill and check that it/they are correctly positioned
under the dispensing spout of the filter holder, using the cup positioning marks (fig.14).
Coffee preparation
n Wait until the TEMPERATURE light (h6) stops flashing, therefore indicating that the appliance has
reached the optimum temperature for making an espresso coffee. Your appliance is now ready for use.
n Turn the espresso button
briefly to pre-wet the ground coffee and then stops for a few seconds and starts again to dispense the
coffee.
IMPORTANT
This pre-brewing process ensures even greater release of the coffee aroma.
n When the volume of coffee has been reached, the appliance stops automatically.
Important
By default, the volume of coffee for "1 cup" is 50 ml; for "2 cups" it is 100 ml.
n Wait a few seconds until the surplus water in the thermo block has been drained (until the "suction
noise" has stopped).
NOTE
A little steam may be released from the water tank. This is completely normal.
n Remove the cup(s) then unlock the filter holder by turning it from right to left until it can be
released from the group head.
Important
Be careful as some steam may be released from the dispensing unit.
16
or to the right to activate the ESPRESSO function. The pump operates
●
) and that the TEMPERATURE
.