Connection Via Tcp Client - NUUO NVRmini 2 User Manual

Step 3: Setup Password if needed. Password is only using to activate a
security feature on the serial server. Once a password is entered it will
be required to access the menu and make change of configuration
when access.
Please write down the Serial number and MAC address, these two parameters are
necessary when user forget your password.
Step 4: Setup according to your POS or Cash Register. Usually all devices are
default setting, you can reserve your time to pass this step.
Step 5: Please restart/reset the box after changing configurations to active
setup.
To reset the unit manually apply power, insert a small plastic tool, and
press lightly depressing reset located between the switch. Hold for 3
seconds and release. The Link and Run light will go out and turn back
on. The SCB-C31A will revert to the last setting.
Every time you change the configuration of SCB-C31, please check above setting,
especially maximum connection and Remote IP address to avoid connection fail.

3.1.4 Connection via TCP Client

If the cash register possess network, please install system according to
following diagram and purchase a POS license to activate this function.
78