I/O Box Input And Responding Action Setup - NUUO NVRmini 2 User Manual

2.2.4 I/O Box Input and Responding Action Setup

1. Open Internet Explorer, Windows Chrome or Mac Safari and log in to the
unit.
2. Click Recording & Event / Event & Action Management.
3. Click the Event & Action tab.
4. Select an input of I/O Box from list.
5. Click the Add button to set up the responding actions of this event.
6. Click the action, and then click the Configure button to modify the details
of that action if necessary.
Output: When an event occurs, the system will send an output signal to

other connected devices.
Email: When an event occurs, the system will send Email notifications.

Make sure to add an Email address first.
CMS: When an event occurs, the system will send out a signal to CMS.

CMS will highlight this event.
Push Notification: When an event occurs, the system will send instant

message to the registered mobile clients as a notification. Mobile users
can check the recording videos on mobile client to watch what just
happened. Refer to
E-map popup: When an event occurs, the system will pop up E-map

with an event indicator to show users the location of the scene clearly.
Show on Camera: When an event occurs, the system will show an alert

message on selected camera(s) of screen.
Push Notification.
32