Server
Address: SMTP (Simple Mail Transport Protocol) server IP
address.
Port: SMTP port.
Sender: Sender information.
Subject: The subject of the mail.
Body: Email content.
SMTP
Authentication: Before sending out an Email, enter the
username and password for SMTP authentication.
Username
Password
4. Click the Send Test Mail button and the system will send a test mail to the
sender. Check it after testing.
5. Click the Save button.
2.2.8 Add Event Contacts
1. Open Internet Explorer, Windows Chrome or Mac Safari and log in to the
unit.
2. Click Recording & Event / Email.
3. Click the Contacts tab.
37