Server Management - NEC Express5800/R120f-2E Configuration Manual

CONFIGURATION GUIDE

Server Management

The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Hardware
monitoring
Boot monitoring
Alerting
Remote KVM
(via LAN)
Remote control
(via LAN)
Maintenance
Others
1
The feature is not supported on VMware ESXi systems.
2
The optional serial port is not available for the feature.
3
Monitoring boot screens is not supported on VMware systems.
4
In VMware systems, only the direct console user interface is supported.
NEC Corporation
–
NEC Express5800/R120f-2E
Temperature/voltage/power/RAID/
standard LANfan /degeneration
(memory/hard drive)
Hardware configuration information collection
Hardware event log collection
BIOS/POST stall, Booting, OS stall, shutdown
HW error, Boot error , and OS panic
(by SNMP, E-Mail)
POST/BIOS setup, ROM utility
Panic screen, Boot screen
CUI-based screen (OS console)
GUI-based screen (OS console)
Remote console recording function
Video recording
Remote reset/power on-off/ dump
Remote power capping
BIOS/BMC FW update
Remote BIOS setup(partial configuration only)
OS shutdown
Remote media (CD/DVD/FD/USB)
CLP (Command Line Protocol) (DMTF
compliant)
Remote control via Web browser (multi user
login at the same time)
Scheduling (without UPS)
EXPRESSSCOPE® Profile key
(Backup/restore BIOS/BMC setup information)
Set automatic IP address via DNS/DHCP
LDAP/Active Directory verification/user control
Clock synchronization of main unit and the RTC
Access log collection
IPMI
IPv6(Web console/CLP only)
Revision 6.0 – July 16, 2015
Standard With Remote KVM
and Media License
 
 
 
1 1
   
 
2
  
2, 3, 4
  
2, 4
  

-

-

-
 
 
 
 
1 1
   

-
 
 
1 1
   
 
 
 
 
 
2.0 2.0
 
kit
32