Table of Contents
Advertisement
Motion Detection (Built-in PIR sensor; Passive Infra-Red)
Option
Detection Enable
Activates the Motion Detection feature.
Detection Input
Selects the input source for the Motion Detection.
Activates an audible signal when the monitor
Buzzer
receives a motion detection signal.
Selects the amount of time, in seconds,
Detection Time
that the monitor displays the motion detection
input image.
Detection Option
Inactivated.
Selects the mode in which the monitor displays
the motion detection input. The monitor takes one
of the following actions:
- PIP & FULL: Displays the motion detection input
Display Type
- FULL: Switches the display to show the motion
INSTRUCTION MANUAL .................................................................................. 17
Function
in the PIP of the current video input source.
Note: The main video source must support the
motion detection input source as a PIP option.
See section "Input Source" in "C. PIP".
detection input in the full screen.
Value
Off or On
AV2, S-Video, RGB PC,
DVI, HDMI1, HDMI2 or
C/R
On or Off
3 ~ 100
PIP & FULL or FULL
Advertisement
Table of Contents
