Getting Started; Preparing The Cook Processor For Use; Using The Cook Processor - KitchenAid KCF0103 Instructions Manual

GETTING STARTED

Preparing the Cook Processor for use

1. Place the Cook Processor on a dry,
flat, level surface such as a countertop
or table.
2. Be sure to provide enough room above
the Cook Processor to open lid and
remove bowl.
3. Remove all packaging materials, if
present.
4. Wash lid and attachments in hot, sudsy
water and rinse thoroughly. Wipe out
inside of bowl with a damp cloth.
Do not immerse bowl. Dry thoroughly.

Using the Cook Processor

14
Plug into an earthed (grounded) outlet. The
Cook Processor should be the only appliance
operating on the circuit. The Cook Processor
is now ready to use. Turn the main power
switch to I (ON).