Table of Contents
Advertisement
___________________________________________________________________________
3. Install the Radial Plate and Pipe Mount Clamp. After you have installed the
ground mount pipe, install the radial plate. (The S9 Radial Plate or S9 PRO
Radial Plate simply slips over the pipe and rests on the ground.)
Next, secure the provided stainless steel pipe mount clamp to the ground
mount pipe about 1-inch above the ground and then slip the provided rubber
o-ring down over the pipe until it sits on the flat saddle portion of the clamp.
(The o-ring acts as a cushion for the base of the antenna, as shown on page
13.)
________________________________________________________________________
S9v 43' Installation Guide
9
Advertisement
Table of Contents
