___________________________________________________________________________
j. Refer to the figures, below. Pull a small U-shaped portion of the wire
through the exit hole and STOP. Carefully remove the hook tool. Then,
hold the top part of the wire firmly in one hand while you use your other
hand to pull the bottom loose end of the wire out through the exit hole. Do
not pull on the top part of the wire – just pull on the lower, loose end!
2. Use your other
hand to pull the
loose end of the
wire out of the
base tube
Bottom of Antenna
________________________________________________________________________
S9v 43' Installation Guide
13
1. Hold top part of
wire firmly. Do
not pull on this
part of the wire.
Top of Antenna