Chapter 2: Engineering Mode; Engineering Mode - Classic Console - Vision Fitness TF20 Service Manual

CHAPTER 2: Engineering Mode

2.1 ENGINEERING MODE - Classic Console

1) To enter Engineering Mode, press & hold the INCLINE UP "▲" and SPEED DOWN keys at the same time for 3-5
"▼"
seconds until Engineering Menu appears on the display.
2) Use the INCLINE and SPEED UP and DOWN keys to select a parameter.
3) Press ENTER to enter a parameter setting.
4) Use the INCLINE and SPEED UP and DOWN keys to change the parameter.
5) Press the START key to save the change to the parameter.
6) Press and hold the STOP key to exit Engineering Mode and return to normal operation.
7