Yamaha CD-S2000 User Manual page 11

®
OPEN/CLOSE
Opens or closes the disc tray.
®
PURE DIRECT
Turns on the PURE DIRECT mode to improve audio
quality.
When this unit is in the PURE DIRECT mode:
• The PURE DIRECT indicator above lights up.·
• The digital output is turned off.
• The front panel display is turned off.
,',
~<i>~
• The least indicators and messages are still displayed in the front
panel display.
• This setting is retained even if you tum off this unit.
@ DISPLAY
Switches the time display. Each time you press DISPLAY
during playback, the time display changes as follows:
• Elapsed time of the current track (default setting). The
TRACK indicator lights up in the front panel display.
• Remaining time of the current track. The TRACK and
REMAIN indicators light up in the front panel display.
• Total remaining time of the disc. The TOTAL and
REMAIN indicators light up in the front panel display.
@
CLEAR
Erases the last programmed track when this unit is in the
program editing mode. See "Program playback" on this
page.
You can erase all programmed tracks when the playback is
stopped.
@
ENTER
Confirms a track number entered when you are
programming tracks.
@
RANDOM
Turns on or off the random playback mode.
Notes!
. "t
• This operation is ineffective for MP3 or WMA discs.
• The random playback mode is canceled when playback is
stopped or the disc is ejected.
@
PROGRAM
Turns on or off the program playback mode. See "Program
playback" on this page.
@
00
(Pause)
Pauses playback. Press
t>
or
00
to resume playback.
@
t>
(Play)
Starts playback.
@
0
(Stop)
Stops playback.
See pages 20 for more information on MP3/WMA
playback.
• Program playback
In the program playback mode, you can play back tracks
in a programmed sequence.
iiqf,sj
• This operation is ineffective for MP3 or WMA discs.
• The programmed tracks are erased when the disc is ejected or
this unit is turned off.
1
Press PROGRAM while playback is stopped.
This unit is set to the program editing mode.
2
Select a track by using the numeric buttons
and ENTER.
3
Repeat step 2 to program the next track.
You can program up to 24 tracks.
4
Press
1>.
Playback starts from the beginning of the
programmed sequence.
11
En
•