Implementing And Keypad; Program Terminal; Operation Of Program Terminal - ALGE-Timing Timy Manual

1

Implementing and Keypad

Please use Timy manual GENERAL
1.1 Menu
Several standard menu-adjustments are described in the general manual for Timy. The
special functions of Timy Terminal will be described in this manual.

2 Program Terminal

The program Terminal was developed in order to create an ideal input device for judges. The
program Terminal is downward compatible to program Terminal-Computer of Comet. The
new instruction set of Timy is however much more comprehensive and is described on the
following sides.
Depending on PC-Software, the user interface and operation of the Timy can be very
different during the usage. Please get information of the producer of the software for the
operation during an event.
2.1 General
In one stream are at most 35 TIMYS possible.
There is always 1 MASTER-TIMY and up to 34 SLAVE-TIMYS.
2.2

Operation of program Terminal:

After switching-on the Timy, every Timy is basically SLAVE.
The display shows "SHALL I BE THE MASTER ? OK=YES"
Now you have to define which Timy is MASTER and which are the SLAVES.
You can define this in two ways, first the type is described, so that you can configure all
TIMYS manually.
You can adjust the number of the Timy with „MENU"->"TERMINAL"->"ADDRESS".
You can also indicate, how many SLAVES will be available in the stream with
„MENU"->"TERMINAL"->"ANZ. SLAVES"
If this value is unequal zero, then this TIMY will be defined as MASTER. If this value is equal
to zero, then this TIMY is defined as SLAVE.
Timy
Terminal
Page 3