Download Print this page

Advertisement

Quick Links

Crib (4791) - Assembly and Operation Manual
Le Lit d'Enfant (4791) – Le Manuel de l'assemblée et l'Opération
Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you adhere
to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only.
Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling
the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our
cribs are made from natural woods. Please understand that natural woods have color variations which are the
result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE.
YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
Félicitations pour l'achat du produit MDB Family. Celui-ci va vous fournir un service à long terme si vous
respectez les consignes d'assemblage et d'entretien qui vous sont fournies. Ce produit est destiné à un usage
domestique uniquement. Tout usage public ou commercial est strictement interdit.
Prière de s'assurer de respecter les instructions ci-après pour réaliser un assemblage parfait. Pour des fins
d'assemblage, utiliser un tournevis cruciforme Philips et la clé Allen inclus dans la boite d'emballage. Ne pas
utiliser un tournevis électrique. Tous nos produits sont fait de bois naturel. Prière de noter que le bois naturel
présente des variations dans sa couleur propre. Celles-ci résultent de la nature même du bois et ne constitue
en aucun un défaut de fabrication.
NE PAS REMPLACER LES PIECES D'ASSEMBLAGE. TOUS LES MODELS VENDUS DISPOSENT DE LA
MÊME QUANTITÉ DE PIÈCES À MONTER ET DE QUINQUAILLERIE FOURNIS. VOTRE MODEL PEUT
PARAÎTRE DIFFÉRENT PAR RAPPORT A CELUI ILLUSTRÉ, ET CE EN RAISON DE LA VARIATION
STYLISTIQUE.
* The crib can later be
converted into a toddler bed
or a full-size bed. To convert
to a toddler bed, turn to page 10.
To convert to a full-size bed,
turn to page 11.
* Le Lit d'Enfant peut être
converti en lit de bébé ou
en grand lit. Pour la conversion
en lit de bébé, allez à la page 10.
Pour la conversion en grand lit,
allez à la page 11.
page 1
revised 26MAY2011

Advertisement

loading
Need help?

Need help?

Do you have a question about the 4791 and is the answer not in the manual?

Questions and answers

Summary of Contents for MDB 4791

  • Page 1 Le Lit d’Enfant (4791) – Le Manuel de l’assemblée et l’Opération Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only.
  • Page 2 CRIB PARTS LES PIECES DE LIT D’ENFANT A. Headboard Side B. Stationary Side C. Left Side D. Right Side A. La tète de lit B. La planche de pied C. Le panneau D. Le panneau gauche droit G. Spring Frame G.
  • Page 3 STEP 1. Étape 1. The headboard assembly consist of rear left leg N, and rear right leg O, headboard side A, and cross bar P. L’assemblée de la tête de lit consiste de la jambe arrière gauche (N) et la jambe arrière droite, la tête de lit A, et la barre transversale (P).
  • Page 4 STEP 4. Étape 4. Swing out four hangers at corner of the spring frame (G) carefully. Attach spring frame FLAT SIDE UP. Choose the height of the spring frame. Start at the highest level and adjust accordingly. Bolt the spring frame (G) to side panels using Allen head bolts (J), washers (M) , lock washers (T), and Allen wrench (Q).
  • Page 5 STEP 6. Étape 6. Attach stationary side B to the left and right sides with 4 machine bolts K, 4 barrel nuts L and 4 lock washers T. Be sure to tighten the cross bar screws now that you have installed the stationary side.
  • Page 6 CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL WARRANTY AND REPLACEMENT PART REQUESTS.
  • Page 7 DO NOT substitute parts. Contact This warranty does not cover any damaged MDB FAMILY for replacement parts and instructional literature if needed. or defective parts that result from installation •...
  • Page 8 Ne pas utiliser le lit si des pièces sont manquantes, endommagées ou de la finition, du design, et du matériel du lit à cassées. Ne pas substituer une pièce à une autre. Contacter MDB barreaux. Les droits spécifiques de cette FAMILY pour le remplacement des pièces et du manuel en cas de besoin.
  • Page 9 BIEN VOULOIR VISITER NOTRE SITE : PLEASE VISIT US AT: WWW.THEMDBFAMILY.COM WWW.THEMDBFAMILY.COM OU ENCORE NOUS CONTACTER PAR OR YOU CAN CONTACT US BY MAIL: COURRIER A L’ADRESSE : MDB FAMILY MDB FAMILY 855 WASHINGTON BLVD. 855 WASHINGTON BLVD. MONTEBELLO, CA 90640 MONTEBELLO, CA 90640 revised09MAY2011...
  • Page 10 Crib (4791) - Daybed Conversion Assembly Le Lit d’Enfant (4791) – L’Assemblée de la conversion de lit du jour * All of the parts and hardware you will need are supplied with the crib at the time of purchase. * Toutes les parties et le matériel vous aurez besoin d'est fourni avec le lit d’enfant lors d'achat.
  • Page 11 The intended user's minimum age must be at least 15 months old and maximum weight must not exceed 50 lbs (22.7 kg). L'utilisateur doit être âgé de 15 mois au moins et le poids maximal ne doit pas être supérieur à 50 livres (22.7 kg). WARNING : Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation.
  • Page 12 STEP 2. Étape 2. The footboard assembly consists of left leg E, right leg F, stationary side B, and cross bar P. Use 3 machine bolts K and barrel nuts to attach left leg E to stationary side B and cross bar P. Complete the assembly by attaching right leg to stationary side B and cross bar P using 3 machine bolts K and barrel nuts.