Advertisement

Lit à barreaux (5981) - Manuel d'assemblage et d'utilisation
Congratulations on purchasing an MDB Family product. This crib will provide many years of service if
you adhere to the following guidelines for assembly, maintenance and operation. This crib is for residen-
tial use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem-
bling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdriv-
ers. All of our cribs are made from natural woods. Please understand that natural woods have color vari-
ations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
Nous vous félicitons de votre achat d'un produit MDB Family. Ce lit de bébé vous procurera des années
de service si vous suivez les directives ci-dessous pour l'assemblage, l'entretien et l'utilisation. Ce lit est
destiné uniquement à une utilisation résidentielle. Toute utilisation dans une institution est strictement
interdite.
Prenez soin de suivre les instructions pour réaliser correctement l'assemblage. Utilisez un tournevis
cruciforme pour l'assemblage, en plus de la clé hexagonale incluse dans la boîte de quincaillerie.
N'utilisez pas un tournevis électrique. Tous nos lits d'enfants sont fabriqués en bois naturel. Il faut com-
prendre que le bois présente des variations de couleur attribuables à la nature et non à un défaut de
fabrication.
NE PAS UTILISER DES PIÈCES DE SUBSTITUTION. TOUS LES MODÈLES ONT LE MÊME
NOMBRE DE PIÈCES ET D'ACCESSOIRES DE MONTAGE. VOTRE MODÈLE PEUT DIFFÉRER DE
CELUI ILLUSTRÉ EN RAISON DE VARIATIONS STYLISTIQUES.
* The crib can later be
converted into a toddler bed
or a full-size bed. To convert
to a toddler bed, turn to page
10. To convert to a full-size
bed, turn to page 12.
* Le lit à barreaux peut être converti
en lit de bébé ou en grand lit. Pour
la conversion en lit de bébé, allez à
la page 10. Pour la conversion
en grand lit, allez à la page 12.
revised 16MAY2013
Crib (5981) - Assembly and Operation Manual
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Crib 5981 and is the answer not in the manual?

Questions and answers

wendy
January 22, 2025

what sizes are the bolts

1 comments:
Mr. Anderson
May 14, 2025

The MDB Crib 5981 uses 3/4-inch Allen head bolts.

This answer is automatically generated

Summary of Contents for MDB Crib 5981

  • Page 1 WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS. Nous vous félicitons de votre achat d’un produit MDB Family. Ce lit de bébé vous procurera des années de service si vous suivez les directives ci-dessous pour l’assemblage, l’entretien et l’utilisation. Ce lit est destiné...
  • Page 2 CRIB PARTS PIÈCES DU LIT C-1. Left C-2. Right B. Front Panel A. Headboard Side Panel Side Panel B. Panneau avant A. Tête de lit C-1. Panneau C-2. Panneau latéral gauche latéral droit E. Front Top Rail D. Back Top Rail E.
  • Page 3 STEP 1. Étape 1. Attach legs (H-1, H-2) to Headboard (A) with 4 round head bolts (M) and lock washers (U). Use 3 wood dowels (Q) to attach back top rail (D) to head- board (A). Fixer les pieds (H-1, H-2) à la tête de lit (A) avec 4 vis à...
  • Page 4 Attach side top rails (F-1, F-2) to side panels (C-1, C-2). STEP 4. Étape 4. Joindre les traverses (F-1, F-2) aux panneaux latéraux (C-1, C-2). Outside Outside Extérieur Extérieur Attach spring frame (J). STEP 5. Étape 5. Fixer le support du matelas (J). Swing out four hangers at corner of the spring frame (J) carefully.
  • Page 5 Attach front panel (B) and front top rail (E) to crib assembly. STEP 6. Étape 6. Installer le panneau avant (B) et la traverse avant (E) à l’ensemble du lit. Do not overtighten the bolts. Ne pas trop serrer les boulons. STEP 7.
  • Page 6 CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL Please refer to the label (sample below) on the inside face of the headboard.
  • Page 7 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. DO NOT substitute parts. Contact MDB FAMILY for replacement parts and instructional literature if needed. • DO NOT use a water mattress with this crib.
  • Page 8 NE PAS utiliser le lit si des pièces sont manquantes, endommagées ou brisées. NE PAS UTILISER DES PIÈCES DE SUBSTITUTION. Communiquer avec MDB FAMILY pour obtenir des pièces de rechange et des instruc- tions.
  • Page 9 CHANGE OU MANQUANTES, VISITEZ-NOUS À : PLEASE VISIT US AT: WWW.THEMDBFAMILY.COM WWW.THEMDBFAMILY.COM OR YOU CAN CONTACT US BY MAIL: OU CONTACTEZ-NOUS PAR LA POSTE : MDB FAMILY MDB FAMILY 855 WASHINGTON BLVD. 855 WASHINGTON BLVD. MONTEBELLO, CA 90640 MONTEBELLO, CA 90640...
  • Page 10 Crib (5981) - Daybed conversion assembly Lit à barreaux (5981) - Assemblage pour la conversion en lit de jour * All of the parts and hardware you will need is supplied with the crib at the time of purchase. * Toutes les pièces et le matériel dont vous aurez besoin sont fournis avec le lit au moment de l’achat. STEP 1.
  • Page 11 The mattress intended for use on the bed shall be a full-size mattress having minimum dimensions of 51 5/8" (1310 mm) in length, 27 1/4"(690 mm) in width and 4" (100 mm) in thickness and not exceeding 6" (152 mm). Le matelas à...
  • Page 12 WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS. Nous vous félicitons de votre achat d’un produit MDB Family. Ce produit vous procurera des années de service si vous suivez les directives ci-dessous pour l’assemblage, l’entretien et l’utilisation. Ce produit est destiné...
  • Page 13 STEP 1. Étape 1. Remove the crib sides, spring frame and post brackets. Enlever les panneaux latéraux, le sommier et les supports. STEP 2. Étape 2. Use the Allen head bolts (D) to attach the Left (E) and Right (F) brackets to the foot board posts.

This manual is also suitable for:

5981

Table of Contents

Save PDF